F981A225MMA资料

SOLID TANTALUM ELECTROLYTIC CAPACITORS

F98

Resin-molded Chip,

High Capacitance Series

Adapted to the RoHS directive (2002/95/EC).

Specifications

ItemCategoryTemperature RangeCapacitance ToleranceESR(100kHz)Leakage CurrentPerformance Characteristics--55 ~ +125°C (Rated temperature : 85°C)±20% (at 120Hz)Refer to the list below (* 1)After 5 minute's application of rated voltage, leakage current at 20°C is not more than 0.1CV or 0.5µA, whichever is greater.At 40°C, 90 ~ 95% R.H., For 500hours (No voltage applied)Capacitance Change Refor to the list below (* 1)Dissipation Factor 150% or less of initial specified valueLeakage Current 200% or less of initial specified valueAt --55°C / +125°C, For 30 minutes each, 5 cyclesCapacitance Change Refor to the list below (* 1)Dissipation Factor 150% or less of initial specified valueLeakage Current Initial specified value or lessAt 260°C, For 10 seconds, Reflow,Capacitance Change Refor to the list below (* 1)Leakage Current Initial specified value or lessLeakage Current Initial specified value or lessAfter application of surge in series with a 1kΩ resistor at the rate of 30 seconds ON, 30 seconds OFF, for 1000 successive test cycles at 85°C, capacitors meet the characteristics requirements listed below.Capacitance Change Refor to the list below (* 1)Dissipation Factor 150% or less of initial specified valueLeakage Current 200% or less of initial specified valueAfter 1000 hours' application of rated voltage in series with a 3Ω resistor at 85°C, capacitors meet the characteristic requirements listed belowCapacitance Change Refor to the list below (* 1)Dissipation Factor 150% or less of initial specified valueLeakage Current 200% or less of initial specified valueAfter applying the pressure load of 5N for 10±1 seconds horizontally to the center of capacitor side body which has no electrode and has been soldered beforehand on an aluminum substrate, there shall be found neither exfoliation nor its sign at the terminal electrode.Dissipation Factor(120Hz)Refer to the list below (* 1)Damp HeatTemperature CyclesType numbering system (Example : 6.3V 10µF)

F980J106MM1

2

3

456789

10

11

Tapingcode

(Refertopage267fordetails)CasecodeCapacitancetolerance

RatedCapacitanceRatedvoltage

SeriesResistance to Soldering HeatSurge∗Drawing

LW1HEndurance∗W2Shear TestS1S2S15N (0.51kg • f)For 10 ± 1seconds(mm)Cace CodeMSLW1W2HS1S20.6 ± 0.11.0 ± 0.1Terminal Strength1.6 ± 0.10.85 ± 0.10.65 ± 0.10.8 ± 0.10.5 ± 0.12.0 ± 0.11.25 ± 0.10.9 ± 0.10.8 ± 0.10.5 ± 0.1JRated voltage(Voltage code)∗As for the surge and derated voltage at 125˚C, refer to page 266 for details.Standard ratings

VCap.(µF)Rated Volt(V)RatedCapacitance(µF) CasecodePart NumberLeakageCurrent(µA)DisspationFactor(%@120Hz)ESR*1∆C/C(Ω@100kHz)(%)Code2.50E40G6.30J101AM161CMMMS201DM2.54472233684.71022472.24.7MMMSMMMSMMMSSMMMSMF980E476MMAF980G226MMAF980G336MMAF980G686MSAF980J475MMAF980J106MMAF980J226MMAF980J476MSAF981A225MMAF981A475MMAF981A106MMAF981A226MSAF981A336MSAF981C105MMAF981C225MMAF981C475MMAF981C106MSAF981D105MMA1.20.91.32.70.50.61.43.00.50.51.02.23.30.50.50.81.60.530153030208202566202030661218647.5447.56667.567.546101012410±30±30±30±30±30±30±30±30±30±30±30±20±30±30±30±30±20±3012.24.71022334768100105225475106226336476686107(S)MMM(M)S(S)MMM(M)SMMSS6.31010223312.24.7101( ) The series in parentheses are being developed.Please contact to your local Nichicon sales office whenthese series are being designed in your application.

1620CAT.8100V1mmMarking

Keeping a capacitor surface-mounted on a substrate upside down and supporting the substrate at both of the opposite bottom points 45mm apart from the center of the capacitor, the pressure strength is applied with 20a specified jig at the center of theR230substrate so that the substrate may bend by 1mm as illustrated.Then, there shall be found no 4545remarkable abnormality on the capacitor terminals.